Skip to main content

Fiber: French manufacturers are alarmed after a third black quarter

Technology: French fiber is struggling in this third quarter of 2019. The sector points to competition from Asia but also the shortage of labor in France, which severely penalizes the deployment of our future networks.

French manufacturers will remember this third quarter of 2019 for a long time. A dark period for the sector, even as demand for optical fiber in France is at its highest, boosted by the deployment of very high speed and the start of the deployment of future networks 5G in France.

As reported on Monday the Professional Union of Manufacturers of Electrical and Communication Wires and Cables (Sycabel), which represents professionals in the sector, activity fell by 20% in the third quarter of 2019 , unheard of since 2011.

While the authorities have recently pointed out the digital infrastructure industry as a strategic sector and that a sector contract should soon be signed to accelerate its influence, fiber professionals are alerted.
certified fiber optic technician salary
Asian competition singled out
For them, "the brutal slowdown in deliveries in the third quarter" is cause for concern, "both in terms of industrial management and the sustainability of investments made in France by the sector".
The Sycabel - which represents companies like Nexans, 3M or Draka - points to international competition, notably from China and South Korea. As its management indicates in the columns of "La Tribune" , imports of fiber produced in China or South Korea today represent 45% of the total production of union members, against only 13% in 2017.

An evolution which is enough to worry professionals in the sector, who are concerned about the quality of the products of their Asian competitors and are calling for the adoption of strict control rules applicable to all players, French and foreign.

Comments

Popular posts from this blog

One strand of optical fiber is about the diameter of a human hair

As the saying goes, one strand of optical fiber is about the diameter of a human hair.CORNING It’s an amazing idea. Now, copper wires—sometimes called “twisted pair” because they are made of pairs of strands of copper twisted around one another—also carry data and telephone signals to homes and farms in much of rural America. But because of the characteristics of copper as a transmission medium, signals that travel over copper doesn’t have the extraordinary frequency range that light signals do, are subject to interference from other signals, and in general, degrade very quickly over more than a short distance. That’s why if you have a copper-wire DSL (digital subscriber line) subscription, you have to be very close to the phone company’s “central office” to get a download signal into your house. A DSL house is connected to a copper wire, not a fiber-optic cable. fiber optic installer salary Not only can light travel over fiber for hundreds of miles with little attenuation (im

Journal of ISSN Industrial Engineering Systems

Fiber optic structureI (Source: Samuel, 1988)  Core  dan  cladding  temade of silica material, glass,  orPlastic ber bertin qualityggi and free water.  Core   has an index blarger scale of cladding (n1 > n2) to the limit critical, so  it's possiblekan  occurrence of  refractionin  total  (total  internal  reflection ).  Withthereby the light will  always bepropagate in the core  to the ends  of the fibers.  Coating   ( jacket ) worksas the core protector and   cladding of t     ekanan physical outside, made of very plastic material quality  (Zanger,  1991,  Thomas,  1995,  Samuel,1988).   Optical fibergenerally classified medoggy 3 types (Figure 4) (Samuel, 1988): 1. Multimode Step Index ,  with finger-jari core 25 – 60 µm, cladding 50 – 150 µm. 2. Multimode Graded Index ,  with fingers core 10 – 35 µm, cladding 50 – 80 µm. 3. Monomode Step index ,  jari-jaricore 1 -16 µm, cladding 10 – 100 µm.  input outputProfilerefractive indexn1n 2n1n 2n 2S 2 S 1S 3 (a). Multimode fiber

There are two methods that are used to measure the loss

There are two methods that are used to measure the loss by insertion with a light source and power meter, a "connection cable test", also called "single-end loss", according to the TIA FOTP-171 standard, and a "cable network test installed" or "loss of two ends", according to the TIA OFSTP-14 (multimode) and OFSTP-7 (single mode) standard. The difference between the two tests is that the single loss test end uses only a launch cable and tests only the connector attached to the launch cable plus the fiber and any other component in the cable. The single-end test is mainly used to test connection cables or short cables since you can test each connector individually. The two-end loss check uses a launch cable and a receive cable attached to the meter and measures the loss of the connectors at both ends of the cable under test. The single-end check is generally used in connection cables to be able to test the connectors at each end of an indi